12V and 24V LED strips

Here you will find a selection of 12V and 24V LED strips for indoor and project lighting. These LED strips are suitable for kitchen worktops, furniture, shelves, stairs, aluminium profiles and decorative lighting.

When choosing an LED strip, pay attention to voltage, power, light output, color temperature and IP rating. 12V and 24V LED strips require a suitable LED power supply, and for a professional result we recommend installing them in an aluminium profile.

LED strip REVAL BULB 2835 IP20

How to choose a 12V or 24V LED strip?

12V and 24V LED strips are low-voltage lighting solutions used for furniture, kitchen worktops, shelves, stairs, niches, profiles and decorative lighting. They are not connected directly to 230V mains power and require a suitable LED power supply.

12V or 24V?

12V LED strips are suitable for shorter runs and smaller lighting solutions. 24V LED strips are usually the better choice for longer runs and project lighting, because voltage drop is lower and the light output remains more even.

What should you check?

  • Power W/m shows how much energy the strip uses per meter.
  • Luminous flux lm/m shows how much light the strip produces.
  • Color temperature defines the tone of the light. 2700K and 3000K are warm white, 4000K is neutral white.
  • CRI indicates color rendering quality. A higher CRI gives more natural colors.
  • IP rating shows whether the strip is suitable for dry rooms, humid areas or protected installations.
  • Cutting interval shows where the strip can be cut to length.

Installation with aluminium profile

We recommend installing LED strips in aluminium profiles. The profile helps dissipate heat, protects the strip from dirt and mechanical damage, and gives the installation a clean finished look.

Choosing the power supply

The power supply must match the LED strip voltage and total power. Calculate the total strip length, multiply it by the W/m value and leave some power reserve. If dimming or control is required, choose a suitable controller or dimmer.

If you are not sure which LED strip, profile or power supply to choose, contact LED House. We help select suitable solutions for home, furniture and project lighting.